Product Data Sheet    

PIR1600W


Passive Infrared Wall Mount Sensor
Hubbell PIR series sensors detect occupancy based on a passive infrared signal. The ceiling mount model is available with a wide view lens for large areas with multiple occupants and a high density lens for areas with a single occupant where small motion detection is desired. The wall mount model is available with wide view and hallway coverage patterns and includes a photocell for ambient light level control. A CU series control unit is required for use with PIR series sensors.

Hubbell Wiring Device-Kellems Product Specifications
 Product  Indoor Sensor
 Application  Wall Mount
 Sensing Technology  Passive Infrared
 Coverage Area  1600 Sq. Ft.
 Adaptive  No
 Photocell  Yes
 Color  
 Power Requirements  24V DC Nominal, 33mA from Hubbell CU Series Control Unit
 Lens Material  Polyethylene
 Dimensions  4.34"H x 2.38"W x 1.83"D
 Housing Material  Polypropylene
 Operating Temperature  32° F to 120° F (0° C to 49° C) with rate of change not exceeding 20° F (11° C) per hour
 Operating Humidity  20% to 90% noncondensing relative humidity
 Storage Temperature  -20° F to 150° F (-29° C to 65° C)
 Storage Humidity  20% to 90% noncondensing relative humidity
 Time Delay  30 seconds to 30 minutes
 Ambient Light  25 to 300 foot candles
 Passive Infrared Sensing Indicator  Red LED
 Mounting Height  8 to 12 ft.










 

Hubbell Wiring Device-Kellems